Shield 16-254-1584 Shields Exoflex Water/Exhaust Hose, 1-5/8" x 12-1/2' seachoice-polyurethane-rod-rack Follow owner's manual recommendations for

Follow owner's manual recommendations for periodic replacement

The remote sensor monitors the bilge/engine compartment during and after fueling

52MM (2-1/16") OceanLink Engine Oil Pressure - 10 Bar/150 PSI - White Dial & Bezel

Aluminum tube supports the end of the steering cable before it attaches to the engine

Edge Limited (2013)

Shield 16-254-1584 Shields Exoflex Water/Exhaust Hose, 1-5/8" x 12-1/2' seachoice-polyurethane-rod-rack Follow owner's manual recommendations forFor use on engine intake or wet exhaust connections where significant bends are required. Also good for holding tank vent and pump out applications or toilet intake discharge. Can be used for bilge pump intake discharge and scupper lines. SAE J2006 R2 LLOYD Registered Type Approved Temperature Range: 22F to 212F, Peak 239F Double the ozone resistance as required by SAEJ2006 Reinforced with synthetic plies and steel wire helix Tighter corrugations