Ruko Hand Tap UNF ≈ DIN 2181 HSS Ground 1-1/2" Taper Tap 246112UNF1 1/2" Made from solid Tungesten Alloy

Made from solid Tungesten Alloy Steel

Jaw Length: 45mm

A specially adapted knife for slitting the outer sheath of cables without damaging the inner conductors with a double edged blade to cut on the push and pull stroke

92mm (W) x 12

Removes the seal without damage to the shaft

Ruko Hand Tap UNF ≈ DIN 2181 HSS Ground 1-1/2" Taper Tap 246112UNF1 1/2" Made from solid Tungesten AlloyOverview The hand tap consists of heavy duty high speed steel. For through threads and bottoming threads in unalloyed and low alloyed steels up to a strength of 800 N mm, malleable cast iron and non ferrous metals. The thread is cut in three operation. Taper tap: 5 6 thread chamfer Specifications Part Number: 246112UNF1 Nominal thread size UNF: 1 1 2" Number of gears per inch: 12 Core hole diameter: 32. 0 mm Length: 150. 0 mm Spiral length: 63. 0 mm